Order
BD
Falcon Assay Plates and BD Falcon HTS Systems from VGDUSA. We offer
BD Falcon Assay Plates and BD Falcon HTS Systems to all Federal, State,
University and Scientific agencies. BD Falcon Assay Plates and BD Falcon HTS
Systems are available at discounted prices for bulk orders and resellers.
BD Falcon Assay Plates and BD Falcon HTS System specifications are
available via e-mail upon request. Please inquire today!
Download BD Falcon Dealer Distributor pricing catalog: CLICK HERE
BD Falcon™ 96
Multiwell
BD Falcon™ 96-Multiwell 1.0 µm Insert
System with Feeder Tray and Lid
BD Falcon Multiwell insert systems are cell culture
assay platforms with one-piece insert housing and a fluorescence blocking,
microporous PET (polyethylene terephthalate) membrane available in 1µm,
3µm, and 8µm pore sizes. BD Falcon systems are designed to increase
efficiency, productivity, and throughput. The black housing of the BD Falcon
96-multiwell insert minimizes crosstalk between the wells and virtually
eliminates autofluorescence. The multiwell insert plate format is compatible
with standard fluorescence plate readers, robots, and fluid handling
instruments. The wide blocking range (490–700nm) of the BD FluoroBlok
membrane allows the flexibility to choose from a variety of fluorophores for
screening compounds in cell-based assays such as compound permeability, cell
invasion and migration, and monolayer permeability. Each BD Falcon insert has
an automation compatible sampling port for sampling above and below the
membrane with standard pipet tips or automated fluid handling equipment. The BD
Falcon 96-well feeder trays with lids (BD-353924) and the 96 square-well flat
bottom assay plates (BD353928) feature a nontreated, hydrophobic polystyrene
surface. Both are sterile and pyrogen-free.
BD Falcon™ HTS Multiwell Insert System is ideal
for high or moderate throughput screening assays where cells are cultured on
multiple permeable supports. Excellent for differentiation, toxicology,
migration, and invasion studies. This assay platform consists of a BD Falcon
24-multiwell polyethylene terephthalate (PET) membrane insert plate with lid
and either a media feeder tray or a polystyrene plate. Large, one-well feeder
tray design enhances reproducibility from well to well and reduces the need for
frequent media changes. Compatible with most robots and fluid handling
instruments that accept BD Falcon 24-well plate formats. Sterilized by gamma
irradiation. For single use only. When used in conjunction with a BD Falcon
24-well plate, sampling ports facilitate media sampling from above and below
the membrane with automated fluid handlers or multichannel pipettors.
BD Falcon Polypropylene 96 Well
Library Storage Plate
Storage BD Falcon plates are ideal for automated
storing, archiving, and transporting chemicals. Rigid, automation-compatible BD
Falcon plates are designed for various protocols requiring solvent resistance,
including DSMO. Two full-width white writing patches provide easy labeling or
bar coding. BD Falcon polypropylene lid is compatible with automated lidding
and de-lidding devices. Ethylene vinyl acetate (EVA) mat cover for U-bottom
plates significantly reduces cross-contamination for long-term storage. Mat
cover working volume is 160µL with DSMO and 200µL with aqueous
solutions. Working Well Volume: 250 µL
These BD Falcon polystyrene plates have a consistent
tissue culture surface chemistry produced by using vacuum-gas plasma treatment.
Exceptional optical clarity allows for visualization of cell monolayers. They
are designed for manual and automated handling. BD Falcon Plates can be stacked
together for efficient use of incubator space. Each plate features a patented
low evaporation lid, deep wells, serrated gripping panels, a large writing
patch, and alphanumeric well identification. Sterilized by gamma
irradiation.
BD Falcon 96 Well Microtest
Polystyrene Assay Plate
These clear, rigid, BD Falcon 96-well plates feature
crystal-grade polystyrene for an untreated, consistent, hydrophobic surface and
distortion-free optics. They feature an alphanumeric notation system for easy
well identification. Ridges on plates permit stable stacking to save benchtop
and incubator space. BD Falcon Plates have a typical working volume of
100–250µL.
BD Falcon™ Cell
Culture 384 Well Tissue Culture Microplate
BD Falcon microplates are offered in a variety of
configurations that meet a wide array of assay needs for high throughput drug
screening applications including fluorescence, luminescense, and absorbance
assays. The BD Falcon polystyrene microplates are tissue culture treated using
a highly controlled vacuum-gas plasma process that produces a more consistent
and even surface for cell attachment, spreading, and growth. The BD Falcon
microplates feature a unique square well with round corner well geometry
designed to minimize wicking and reduce air bubble formation, while increasing
volume capacity and surface area. BD Falcon Plate dimensions meet industry
standards for laboratory automation equipment and robotic compatibility. The
total volume per well is 120µL, with a typical working volume of
25–90µL.
BD Falcon White with Clear Bottom
384 Well Microtest Polystyrene Assay Plate
384-Well BD Falcon Polystyrene Assay Plate. Standard
surface for low surface binding. Flat bottom. No lid. 120uL total well
capacity. Surface area per well: 10.9mm2. Nonsterile. 25/bag. White/Clear.
BD Falcon Black 96 Well Microtest
Polystyrene Assay Plate
Solid black, flat-bottom, BD Falcon 96 well assay
plates are available with standard, untreated, or tissue culture surfaces.
Plates are designed to enhance the signal in fluorescence-based assays while
minimizing background fluorescence and reducing well-to-well crosstalk.
BD Falcon™ 96 Well
Microtest™ Plate Tissue Culture Treated Polystyrene
These BD Falcon 96-well tissue culture treated
polystyrene plates are designed with raised wells and inter-well spacing to
reduce cross-contamination. Working volume is 0.25mL. U-bottom. The low
evaporation polystyrene lid utilizes a labyrinth design to reduce media
evaporation. Lids fit one-way with raised rings for each well that further
reduce chances for contamination. Lids also have a raised stacking ridge for
easy storage. Ordering Information: Plates and lids are shipped in special
peel-apart packaging to protect sterility.
BD Falcon Microplates are offered in a variety of
configurations that meet a wide array of assay needs for high throughput drug
screening applications. The plate format allows assay protocols to run in a
smaller volume, resulting in reagent cost savings. These BD Falcon polystyrene
microplates feature a unique square well with round corner well geometry
designed to minimize wicking and reduce air bubble formation while increasing
volume capacity and surface area. Plate footprint and dimensions meet industry
standards and specifications, allowing compatibility with laboratory automation
equipment and robotics. The total volume per well is 120µL, with a
typical working volume of 25–90µL. An A1 notch located on all plates
facilitates plate orientation. Clear alphanumerics on each plate enable quick
and convenient readability. The standard, untreated surface is ideal when a low
to medium binding surface is required. BD Falcon Plates are used in
fluorescent, luminescent, and absorbant assays.
These BD Falcon microplates are constructed from a
proprietary resin with low UV absorbance in the 260/280nm range. This design
facilitates DNA, RNA, and protein quantitation applications. Rigid construction
ensures that plates are automation-friendly for use in 96-well
spectrophotometers. Microplates are clear, nonsterile, and feature flat-bottom
wells and an A1/H1 notch designation. Total volume: 370µL.
BD Falcon Polystyrene plates feature deep well
design to control contamination while reducing evaporation and minimizing edge
effects. BD Falcon Plates have serrated gripping panels for easier handling and
a writing patch for plate identification. All BD Falcon plates except the ELISA
enhanced plate include lids.
BD Falcon Polystyrene 96-well plates feature flat,
injection molded bottoms to provide low variability in light transmittance as
well as excellent optics for imaging. Clear bottom is 0.75mm (1/32") thick. BD
Falcon plate base does not have serrations, allowing a bar code to be placed on
any side. BD Falcon plates are supplied with alphanumerically numbered sterile
lids. Low evaporation lids are constructed of polystyrene. Working Well Volume:
100–250 µL
Color
BD No.
Unit
Price USD
BD Falcon Plates with Tissue Culture Treated
Surface, Sterile
These nonsterile, flexible, 96-well, polyvinyl
chloride (PVC) assay plates feature an alphanumeric identification system for
easy well location and plate orientation. The optional PVC lid minimizes
evaporation. BD Falcon plates are easy to cut apart. Ordering Information:
Plates are packaged 25 per dispenser box. Lids are sold separately.
These BD Falcon 96-well polypropylene plates are
designed for ease of use and flexibility. Available in 1mL or 2mL well volumes,
BD Falcon plates have been manufactured to consistent external dimensions,
reducing the time required to adjust liquid handling systems. Specially
designed conical well bottom improves sample concentration, reconstitution and
centrifugation. The sidewalls of the wells have rounded corners to improve
mixing and reduce wicking.
BD Falcon™ Tissue Culture
Treated 96 Well Flat Bottom Plate
BD Falcon 96 well flat and round bottom plates are
made from crystal grade polystyrene and are tissue culture treated by vacuum
gas plasma. These BD Falcon 96 well plates are supplied with a low evaporation
lid containing a patented labyrinth air passage system for optimal gas
exchange, which reduces evaporation and minimizes contamination. Standard
microplate footprint ensures automation compatibility. Sterilized by gamma
irradiation and nonpyrogenic. Notch: A12/H12. Plate height: 14.3mm. Plate
height with lid: 15.5mm
This 24-well polystyrene BD Falcon plate is designed
for assays not requiring cell attachment. The surface is nontreated for a
hydrophobic growth surface and reduced cell attachment. Plate features
flat-bottom wells with alphanumeric well identification, condensation rings,
and a labyrinth lid for reduced evaporation and contamination. Growth area is
2.0cm2 per well. Well volume is 3.5mL. Sterilized by gamma irradiation and
pyrogen-free.
384-Well BD Falcon Polystyrene Assay Plate. Tissue
culture treated surface for cell attachment, spreading, and growth. Flat bottom
plate with lid. Wells feature beveled edges for reduced wicking. 120uL total
well capacity. Surface area per well: 10.9mm2. Sterile. 5/bag. Clear.
BD Falcon™ Black with Clear
Bottom 384 Well Microtest™ Plate
384-Well BD Falcon Polystyrene Assay Plate. Tissue
culture treated surface for cell attachment, spreading, and growth. Flat bottom
plate with lid. Wells feature beveled edges for reduced wicking. 120uL total
well capacity. Surface area per well: 10.9mm2. Sterile. 5/bag.
Black/Clear.
BD Falcon™ White with
Clear Bottom 384 Well Microtest™ Plate
384-Well BD Falcon Polystyrene Assay Plate. Tissue
culture treated surface for cell attachment, spreading, and growth. Flat bottom
plate with lid. Wells feature beveled edges for reduced wicking. 120uL total
well capacity. Sterile. Surface area per well: 10.9mm2. 5/bag.
White/Clear.
384-Well BD Falcon Polystyrene Assay Plate. Tissue
culture treated surface for cell attachment, spreading, and growth. Flat bottom
plate with lid. Wells feature beveled edges for reduced wicking. 120uL total
well capacity. Sterile. Surface area per well: 10.9mm2. 5/bag. White.
